This rusty metal roof that leaked every time it rained is like many of the metal roofs that our Certified Installers deal with every day. Every Square inch of this roof was power-washed using over 3,000 pounds of pressure to ensure that the Southeastern system would adhere to the metal. After power washing, rust primer was applied to the entire roof area. Although the rust primer is only necessary where visible rust is apparent, as you can see, this entire roof definitely needed it.
After priming the roof, we begin the waterproofing stage. Every penetration, fastener and seam is addressed to make sure they do not allow water to pass through the panels into your building. On this roof, a polyester liner was used on every seam and penetration, and a brush grade sealant was applied to every fastener to ensure all are water-tight.
The final stage is to apply two coats of a UV resistant acrylic elastomer over the entire roof to form a seamless rubber-like membrane that will keep this building cool and dry for years to come. Please contact Southeastern Coatings to receive a free survey of your roof even if it doesn’t look this bad to begin with.
Choose another roof type below to see the dramatic difference Southeastern Coatings can make on your roof: