SECW: Roof Coatings Commercial Roofing Flat Roofing Repair Metal Roof Repair

Product Data Sheet

Ceramic Acrylic 212

DESCRIPTION

Acrylic 212 is a 100% acrylic ceramic elastomeric coating for all types of roofs including metal, modified bitumen, single ply, and polyurethane foam. It contains ceramic micro-spheres which offer superior radiant barrier protection, and algaecides which makes it ideal for application over most types of roofs.

BENEFITS

Reduces daily expansion and contraction (thermal cycling) of metal roofing.
Contains strong rust inhibitive pigments.
Reflects 90% of the heat and harmful UV rays of the sun.
Excellent reflective properties which helps to reduce cooling costs. Prevents premature degradation.
Contains a strong mildewcide / fungicide.
Excellent adhesion to various substrates.
Superior resistance to dirt pick-up, helps stay white longer and maintains reflectivity.
Easy to use, easy clean up, non-toxic and VOC compliant water based coating.

All surfaces to be coated must be cleaned properly. Power washing is recommended. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.

Acrylic 212 is ready to use. Thinning is not required or recommended.

Spray: Airless sprayer. 3000 p.s.i., 2 g.p.m. capacity with a #027-#031 tip.
Brush: Good quality synthetic bristle brush.
Roller: Long nap roller.

TECHNICAL DATA

Color:	White; standard and custom colors available.
Viscosity:	115 – 120 KU @ 25°C / 77°F
Density, lb./gal:	11.78 ± .1
PH:	> 8
Percent solids by Volume:	60%+/- 1%
Percent Solids by Weight:	63% ± 1%
Flash Point:	Same as water.
Hardness, Shore A:	60 – 80 (ASTM D-2240)
Tensile Strength at Max Stress:	200 p.s.i. @ 25°C / 77°F 500 p.s.i. @ -17°C / 0°F (ASTM D-412)
% Elongation at Break:	500% @ 25°C / 77°F 300% @ -17°C / 0°F (ASTM D-412)
Permeability:	5 perms/inch. 20 mils thick coating (ASTM E-389)
Coverage:	2 gallons per 100 sq.ft. yields 20 dry mils 3 gallons per 100 sq.ft. yields 30 dry mils 4 gallons per 100 sq.ft. yields 40 dry mils
Recommended Coverage:	Two to four gallons per 100 sq ft depending on surface
Min. Surface Application Temp.:	45°F. Do not allow to freeze.
Drying Time:	3 hours @ 77°F, 50% relative humidity; to sustain foot traffic.
Packaging:	5 gallon buckets, 50 gallon drums.
Energy Star Solar Reflectance:	Initial Solar Reflectance = .88 Solar Reflectance after 3 years = .84