SECW: Roof Coatings Commercial Roofing Flat Roofing Repair Metal Roof Repair

Product Data Sheet

Butyl Coating 310

DESCRIPTION

BUTYL 310 is a butyl rubber elastomeric coating designed for the protection of Polyurethane foam, metal, modified bitumen, single ply, concrete and other surfaces. Its formulation incorporates elastomeric butyl rubber and selected additives. Once cured, this sprayed applied polymer provides a durable, seamless flexible waterproof membrane that resists cracking and will allow for the normal expansion and contraction that may take place within the surface of the structure. BUTYL 310 provides excellent UV protection and superb resistance to any moisture penetration.

RECOMMENDED USES

BUTYL 310 is recommended as a protective vapor barrier coating to most surfaces as well as roof applications, including a variety of situations such as polyurethane foam, seams, fasteners, gutters, vent pipe flashings, air conditioning units and expansion joints. Ideal for metal buildings that may contain visible rust.

APPLICATION INSTRUCTIONS:

The suggested application process is airless spray, brush, or long nap roller. Apply BUTYL 310 only to clean, dry, sound surfaces free of loose particles or other foreign matter. Apply two coats of BUTYL 310 to roof or wall allowing 10-12 hours between coats

LIMITATIONS AND PRECAUTIONS:

WARNING: This product contains VM & P Naphtha and Xylene. KEEP AWAY FROM HEAT, OPEN FLAME OR SPARKS. USE ONLY IN WELL VENTILATED AREAS WITH PROPER PROTECTIVE EQUIPMENT. Avoid breathing vapor or mist.

Approved (MESA/NIOSH) chemical respirator and protective clothing must be worn by applicator and personnel in vicinity of the application. Provide mechanical exhaust ventilation in enclosed areas. Positive pressure fresh air hose masks are required for interior applications.

TECHNICAL DATA

Color:	White
Viscosity:	2000-2500 cps
Tensile Strength:	1000 ± 50 psi
Elongation:	900% ± 50%
Total Solids:	40% ± 2%
Flash Point:	68° F
Hardness:	45 Shore A
Elastic Recovery:	100%
Cure Times Dry to Touch Tack Free Recoat	4 hours 8 hours 4-10 hours
Permeability:	.005 perm inch
Coverage:	2.5 gallons per 100 sq.ft. yields 16 dry mils 3.5 gallons per 100 sq.ft. yields 23 dry mils
Shelf Life:	12 months @ 40°F-90°F
Weight per Gallon:	7.0 lbs. per gal
Impact Resistance:	Exceeds 160 in/lb.
Clean Up:	Mineral Spirits
Service Temperature:	-50° to 200° F
Thinner:	Xylene